Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PIN FIN TEMPERATURE ANALYSIS IN ANSYS ..BE HELPFUL!!

Thread starter ganeshpadmanabhan
Start date May 5, 2001

Status: Not open for further replies.

May 5, 2001

ganeshpadmanabhan

Mechanical

I am novice in working with Ansys 5.4, and I am unable to select the material for analysis for my simple problem, viz. a 1-Dimensional, Steady State one..Pin fin, Circular cross section, Base and ambient temperature known..conduction along its length, and convection to atmostphere..fin's end is insulated.
If you could help, please give me if possible the the actual command input/ GUI click 'works'!and if you don't mind..ASAP!