Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pipeline thermal expansion in Ansys

Status
Not open for further replies.

elbow1

Coastal
Oct 25, 2004
11
0
0
HK
why the thermal expansion results of Ansys is only about half of the analytical results? i apply the body loads to pipe16 element. Anybody meet the same problem? thanks.

 
Status
Not open for further replies.
Back
Top