When I opened the previosly saved plaxis file, it all became academic version, I ended up can't access the file . Is there anyway to access the previously saved file ? I am using the advanced 21 version, not any academic version, why it will become academic version suddenly?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Plaxis academic version
- Thread starter dccd
- Start date
SethGuthrie
Civil/Environmental
Here's some suggestions from my colleague in Plaxis support.
In general PLAXIS supports backwards compatibility. So, a project created in an older version can be loaded in a newer version, e.g. PLAXIS CONNECT Edition V21.
In your case it might be that the project is corrupted or missing some files, which can happen when copy & paste or during the previous save of the project. The project is most likely missing some important information about the license used and it defaults to an Academic license.
I would recommend reaching out to our technical support teams. Then, one of our support engineers can help you in detail:
In general PLAXIS supports backwards compatibility. So, a project created in an older version can be loaded in a newer version, e.g. PLAXIS CONNECT Edition V21.
In your case it might be that the project is corrupted or missing some files, which can happen when copy & paste or during the previous save of the project. The project is most likely missing some important information about the license used and it defaults to an Academic license.
I would recommend reaching out to our technical support teams. Then, one of our support engineers can help you in detail:
- Status
Similar threads
- Locked
- Question
- Locked
- Question