PLC 5 and ControlLogix MSG instruction

[gjarwani]

I am trying to send data from ControlLogix to PLC 5 using MSG instruction. My Ethernet address for ControlLogix is 192.168.1.12 and for PLC 5 is 192.168.1.15. They are on the same network. My Ethernet module name is Enet_1. In my MSG instruction on ControlLogix, I put path field: Enet_1, 1,192.168.1.15; Message type: PLC5 typed read.

When I run the program, it gives me error: connection failure. Extended error code is 312.

Please let me know what mistake I am doing.

 

[TWControls]

Think the outbound port out of your Ethernet module should be 2

Enet_1,2,192.168.1.15

----------------------------------
TW Controls -

http://www.twcontrols.com

 

[ADMIRALKEN]

I agree with TW, the output port on most modules is 2, with the exception of the DH/RIO module, which has ports 2 & 3.