I have a fuel gas burner on a Emuslion treater, and at 60 degC ( design) Oil is from the Oil Wells, still unable to break the emulsion.It has been suggested we need to go to 80 but the heater is not designed for this temp.Will incompatable Oil Field water cause emulsion
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Please anyone advise on a Emulsion treater,
- Thread starter tobyman
- Start date
- Status
Similar threads
