Normal output of 6 channels of PWM is possible, but the 6 channels of signals are all synchronized. If the three-phase full-bridge inverter circuit is controlled, the difference between the three phases must be 120 degrees. How should this be reflected in the program? 3 Stagger the output of pwm for a period of time, and output alternately according to the difference of 1/3 of the cycle?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Please tell me, how to use 6-channel PWM wave to control the switch of MOS tube?
- Thread starter sunny2021
- Start date
Similar threads
- Locked
- Question