Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

polymer dilution

Status
Not open for further replies.
Doriska86

Doriska86

Chemical
Joined
Nov 29, 2022
Messages
2
Location
AU
I have 0.26% polymer solution. I need to dilute it twice 10:1 in the pump and in the point of injection. Feed Rate required Amount of Chemical (Inactive Ingredient) is 160 kg/h or 3.5m3/day=0.145m3/h,
What is the volume of water required?
 
Sort by date Sort by votes
Is the SG of the solution 1.09 or 1.1?

Regards
Ashtree
"Any water can be made potable if you filter it through enough money"
 
Upvote 0 Downvote
Use a polymer calculation at this link:

Link

or do a manual calculation:

Link
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Steve456
  • Locked
  • Question Question
Polymer Dilution/Feed Rate Calculations
Replies
1
Views
562
jaytelle
jaytelle
USAeng
  • Locked
  • Question Question
Good polymer mixing or injection methods for dewatering sludge?
Replies
4
Views
1K
USAeng
USAeng
tipp79
  • Locked
  • Question Question
Use of Carrier Water & it's Dilution Effects
Replies
5
Views
862
operatorjoe
operatorjoe
OneManWolfpack
  • Locked
  • Question Question
NaOH (Caustic) dilution system
Replies
4
Views
801
bimr
bimr
chiggy
  • Locked
  • Question Question
Typical Polymer Solution Strengths?
Replies
4
Views
231
ch81pc
ch81pc

Part and Inventory Search

Sponsor

Back
Top