samsangsam
Mechanical
Anyone konw the issue with the teflon build up on the moulding tool?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
POM +PTFE with teflon build up on the plastic moulding process
- Thread starter samsangsam
- Start date
- Status
Paulkuklych
Mechanical
Teflon build up or teflon uniform coating?
Paul Kuklych
Paul Kuklych
- Thread starter
- #3
samsangsam
Mechanical
it is deposit of the material stick on the mold and cause the part become like uneven flat...
Paulkuklych
Mechanical
Here is a link to information on electroless nickel-Teflon coating for moulding tools.
It provides a hard even coating giving both corrosion protection and low friction values to help part ejection in injection moulding.
Paul Kuklych
It provides a hard even coating giving both corrosion protection and low friction values to help part ejection in injection moulding.
Paul Kuklych
- Status
Similar threads
- Locked
- Question