Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PONTOONS DESIGN OF EXTERNAL FLOATING ROOF

Status
Not open for further replies.

ROMEUM2

Mechanical
Oct 13, 2009
24
ES
Hi all,

I never have designed an external floating roof, but now i0m working in a project with this kind of equipment.

I have a lot of questions about the topic. Can anyone give a guideline in order to start???

How many pontoons have an external floating rood??

Thanks,
 
Replies continue below

Recommended for you

I have never seen any useful publicly available information on the topic. Designs are proprietary by each manufacturer. Designs have also varied tremendously through the years, and from manufacturer to manufacturer.

On the number of pontoons, you have a requirement that the roof must float if the center deck and any two adjacent pontoons are punctured, and that, to some extent, provides the lower limit of the number of pontoons for a smaller roof.
 
Hi Thanks for the information,

Have you and example of calculation of an API TANK.

Thank you
 
me too i need information for design internal floating roaf
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top