Abdullah.W
Electrical
- Mar 26, 2025
- 1
Hi Fellows,
I have a VSD with PIHF (harmonic filter) to operate the conveyor, as soon as it runs the instantaneous power factor falls to 0.3 - 0.4, which is pretty poor. I am getting 5V on the neutral as well. Earthing appears to fine. Could any one assist with the trouble shooting?
I have a VSD with PIHF (harmonic filter) to operate the conveyor, as soon as it runs the instantaneous power factor falls to 0.3 - 0.4, which is pretty poor. I am getting 5V on the neutral as well. Earthing appears to fine. Could any one assist with the trouble shooting?