post builder MOM variable needed

[berri2]

Hi Guys,

I need a MOM variable for Cutter compesantion on postbuilder.

I tried to find it but I'm young learner on postbuilder.

Thanks.

 

[markrief]

There are many variables related to cutter compensation. To see mom variables, use the mom variable browser in post builder, or turn on the review tool.

If you edit the D word, you should also see some common variables that are used.


Mark Rief
Product Manager
Siemens PLM

 

[berri2]

Thanks Mark

 

[cadcamnx]

hi...

these are some examples that you can use for milling
radius compensation for reminding us that have to assemble the variable
correctly but of error

or go to post builder please browse utilies variables enter cutcom
will show a list of all possible options

but these are below are the main

mom_cutcom_mode
mom_sys_cutcom_code(LEFT)
mom_sys_cutcom_code(ON)
mom_sys_cutcom_code(RIGHT)
mom_sys_cutcom_status

goes this way on the block

$mom_sys_cutcom_code($mom_cutcom_status)

hug...

Andre....


specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world