Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Post builder tool offset number

Status
Not open for further replies.
Proizvodnja

Proizvodnja

Mechanical
Jul 2, 2014
44
How to change tool without offset number, and in the first rapid move call for that offset.

N5 G90 G71 G95
N10 M03 S600 M39
N15 T0100
N20 G59 Z0
N25 G00 X500 Z200 T0101
 
Status
Not open for further replies.

Similar threads

AlexCLE
  • Locked
  • Question
Post builder change full circles to shorter arcs
Replies
0
Views
924
AlexCLE
AlexCLE
E
  • Question
Direction of an Offset Curve
Replies
0
Views
441
ErkiPerki
E
nxexplorer
  • Locked
  • Question
NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Replies
0
Views
228
nxexplorer
nxexplorer
Cmesserli
  • Locked
  • Question
NX 2212 Library Reference Number/ Catalog Number
Replies
3
Views
415
Anton Liubimov
Anton Liubimov
jopek323
  • Locked
  • Question
NX Post Builder Rotary AUTOCLAMP
Replies
0
Views
200
jopek323
jopek323

Part and Inventory Search

Sponsor

Back
Top Bottom