Hello people
Who did do the course:
POST BUILDING TECHNIQUES course code TR11060
Can someone tell me their experience?
Who did do the course:
POST BUILDING TECHNIQUES course code TR11060
Can someone tell me their experience?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
POST BUILDING TECHNIQUES 1
- Thread starter boomstra
- Start date
-
1
- #2
Boomstra,
I took the class when it first was released. (V18?)
If you want to build posts, I would highly recommend it.
I still use the materials provided (textbook, workbook & machine/controller questionaire) all the time.
If you take the class, take really good notes. There are many things covered that I didn't need to use right away, but later needed.
Also, the Debugger / Review Tool is your friend!
Happy Postbuilding
Be Well
I took the class when it first was released. (V18?)
If you want to build posts, I would highly recommend it.
I still use the materials provided (textbook, workbook & machine/controller questionaire) all the time.
If you take the class, take really good notes. There are many things covered that I didn't need to use right away, but later needed.
Also, the Debugger / Review Tool is your friend!
Happy Postbuilding
Be Well
- Status
Similar threads
- Locked
- Question
- Locked
- Question