Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Potting agent at 25,000 ft

Status
Not open for further replies.

MAC3382

Industrial
May 21, 2006
33
Hello, All:

I would appreciate any suggestion for a potting/encapsulating compound to use in a device we are constructing.

The device is custom electromagnet used on an aircraft. The potting/encapsulating compound will fill the voids around the coil and it will not be required to offer any mechanical support to the device.

The material must operate up to 25,000 feet and withstand -40C to 150 C.

Thank you for the help,

Mac

 
Replies continue below

Recommended for you

We use Epoxylite #813-9 on a signal coil that is in a high fuel vapor area. High temperature
It is made for electronics applications.
epoxylite and PD George companies are suppliers and if this isn't sufficient, I'm sure they can recommend something that is.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor