designplant
Marine/Ocean
A vendor offer me Practice E but the Client said in the bid for Practice B of ASTM A262 . Wht's d difference between the two practices??
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Practice of ASTM A262 ?
- Thread starter designplant
- Start date
- Status
DiplingAndre
Petroleum
Practice B:
This practice describes the procedure for conducting the
boiling 120-h ferric sulfate–50 % sulfuric acid test.
As result you measure the weight loss and calculate a corrosion rate (millimetre per month).
Practice E:
This practice describes the procedure by which the
copper–copper sulfate–16 % sulfuric acid test...
boiled for 15h to 72h (most common is 24h). After this you bend the specimen and look for "cracks" from IGC.
This practice describes the procedure for conducting the
boiling 120-h ferric sulfate–50 % sulfuric acid test.
As result you measure the weight loss and calculate a corrosion rate (millimetre per month).
Practice E:
This practice describes the procedure by which the
copper–copper sulfate–16 % sulfuric acid test...
boiled for 15h to 72h (most common is 24h). After this you bend the specimen and look for "cracks" from IGC.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question