Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure ratings for TriClamp Ferrules

Status
Not open for further replies.
SVK303

SVK303

Mechanical
Mar 10, 2014
1
My ASME inspector seems to think that these sanitary ferrules need pressure ratings per sec.VIII div.1. I know that ASME pressure rated clamps are available but what about the fitting itself. His concern is the flanged portion. Has anyone had similar issues?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Talk to Dixon (Bradford Sanitary Fittings) They have ASME certified material for Tank Ferrules. They probably have pressure and temperature limiting data for the ferrules as well as the joints.

Regards
StoneCold
 
Upvote 0 Downvote
Check out ASME VIII-1 Mandatory Appendix 24.
There are formulas and you can work out the stresses.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

teokal
  • Question
Saddle calculations for ASME VIII Div.2 Pressure Vessel - paragraph 4.15
Replies
0
Views
968
teokal
teokal
S
  • Question
Inquiry about pressure vessels 1
Replies
2
Views
2K
TGS4
TGS4
E
  • Question
Thin Walled Pressure Vessel
Replies
4
Views
1K
TGS4
TGS4
wdavidchris
  • Locked
  • Question
ASME VIII Div.1 - Hydrostatic Test Pressure for A240 304/304L 1
Replies
9
Views
366
EdStainless
EdStainless
1965mt
  • Locked
  • Question
Pressure Washer code requirements
Replies
0
Views
147
1965mt
1965mt

Part and Inventory Search

Sponsor

Back
Top Bottom