Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure Valve Chattering 6

Status
Not open for further replies.

erdemm

Petroleum
Jul 2, 2003
6
0
0
FR
Hello,

I am still working on a project about "chattering" in pressure relief valves.

My question is:
1) What is the "main" cause of chattering? (pressure loss within the valve?)
2) What are the other important causes?
3) How do those causes make the system to chatter?

Thanks in advance
Erdem Ogut
 
Replies continue below

Recommended for you

Regarding Terminology, Appendix G was already a part of the
National Board Inspection Code when Appendix J was added by the Sub-Committee on Overpressure Protection:

APPENDIX G — SAFETY VALVES ON THE LOW-PRESSURE SIDE
OF STEAM PRESSURE REDUCING VALVES

APPENDIX J — GUIDE TO JURISDICTIONS FOR AUTHORIZATION OF
OWNERS-USERS TO MAKE ADJUSTMENTS TO PRESSURE RELIEF VALVES

Of course NBIC users of both sections employ the abbreviation PRV.

J. Alton Cox
President
DeLuca Test Equipment
 
Dear All,

Thank you for your great help.
You helped me to comprhend the logic of the problem very well.

Kind regards,
Erdem
 
Status
Not open for further replies.
Back
Top