Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/E plots to ENCAD NOVA JET PRO 36

Thread starter submariner55
Start date Sep 15, 2006

Status: Not open for further replies.

Sep 15, 2006

submariner55

Mechanical

We are having difficulty plotting Wildfire 3.0 to our Nova Jet 36. The plots are not coming out in the correct size requested. We also are unable to rotate the plot from portrait to landscape. If we do, the plot gets clipped off.

Any ideas? We are running Windows XP drivers.

Brian Christiano, P.E.

http://www.bcengineeringanddesign.com