AboveRedline
Automotive
- Mar 13, 2003
- 38
We recently purchased a Dimension 3D ABS Plus printer. The pieces were coming out great size wise but they leaked like seives. Dimension wanted $80 for a handball can size container of sealer.
Someone told us to try MEK, methyl ethyl keytone. IT WORKS GREAT!
In general brush it on and it disolves a small amount of the ABS and it will skin over when it dries. Add more coats for a better seal. You can also glue pieces together if you use enough of it and moderate pressure.
Hope this helps someone.
Someone told us to try MEK, methyl ethyl keytone. IT WORKS GREAT!
In general brush it on and it disolves a small amount of the ABS and it will skin over when it dries. Add more coats for a better seal. You can also glue pieces together if you use enough of it and moderate pressure.
Hope this helps someone.