Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Procedure for handling Potassium Permanganate

Status
Not open for further replies.

gladkenn

Mechanical
Jul 25, 2004
58
We will be using Potassium Permanganate for our scrubber. Any suggestions in handling this chemical as it is hazardous and safety to personnel is very sensitive for this.
 
Replies continue below

Recommended for you

material data safety sheets are the best source

if you employer does not have them, then the supplier of the chemical or the internet is a good source

 
Thanks. I have it already from the internet.
 
The greater hazard is likely the material after it absorbed the H2S, etc.

John
 
I've got another question!
Is KMnO4 solution reacts with BI pipe?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor