ProE Modelling Exercise 1

[seesaw]

Hi I Joined a engineering company and have been given the option to teach my self Pro E for a hour each day. I know the basics but need some thing to model. Are there any projects on web or elsewhere where i can model parts from 2D drawings and produce an assembly? I really want to make good use of this time.

 

[looslib]

PTC.com has a cell phone tutorial that can be downloaded.

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
Sr IS Technologist
L-3 Communications

 

[troy06]

I did the same thing about 2 years ago.I found a few great resources.I hope they help you.

http://www.staffs.ac.uk/~entdgc/WildfireDocs/tutorials.htm

MECH 410/520 Pro/E Tutorials

http://www.me.cmu.edu/academics/courses/NSF_Edu_Proj/Wildfire_short_course/tutorials.htm

 

[Heckler]

Look at the things on your desk.....bam instant modeling exercise.

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2007 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.

 

[PeterStock]

A good thing would be to find examples of parts and assemblies your company produces and create models from copies of the drawings. You might model older parts that do not exist in your cad system as yet or are in a different cad system. Ask your suppervisor or other engineers in the company.

 

[yawangle90]

Here's a scientist's web page, he's done a fair amount of ProE modelling. You can just follow the actual PRT models to practice!

http://www-eng.lbl.gov/~ghiorso/

http://www-eng.lbl.gov/~ghiorso/Darht_Alignment/Darht_Files/Release/Modules/

PS everyday household products make good project starters.