m240
Military
- Mar 6, 2003
- 3
By making the angle of a chamfer basic does this mean the angle has to be "Perfect"?
There is a discussion here about the validity of showing the angle as a basic and using the tolerance block in the drawing title block to control the chamfer size. Thus allowing angle variation within the limits of the depth of chamfer.
Is this a valid way of controlling the angle of the chamfer?
One discussion is to have the angle tolerance dictated by an angular tolerance in the title block.
Our ANSI Y14.5-1994 book does not discuss this.
Any help would be appreciated.
Tony
There is a discussion here about the validity of showing the angle as a basic and using the tolerance block in the drawing title block to control the chamfer size. Thus allowing angle variation within the limits of the depth of chamfer.
Is this a valid way of controlling the angle of the chamfer?
One discussion is to have the angle tolerance dictated by an angular tolerance in the title block.
Our ANSI Y14.5-1994 book does not discuss this.
Any help would be appreciated.
Tony