Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PSSE version 26 Help

Status
Not open for further replies.

lightmeup

Electrical
Jan 31, 2011
5
Dear all, I am working with a System Operation company in India. I have recently started working on the PSS/E software version 26. I want to know what all studies can be performed with the PSS/E. Also how to calculate TTC/ATC using PSS/E and is there any option to draw SLD using PSS/E *.sav file? I found that in PSS/E 30 or later, there is one option of converting *.sav file to *.sld (slider file). But I could not find a similar option in PSS/E 26. Your help will be highly regarded
 
Replies continue below

Recommended for you

@above: I have gone through that page earlier. Not much of help..:(
Actually the PSSE manual is an ocean.
 
I haven't used PSS/E for years, but if I remember correctly, .SLD files were not used until more recent versions (maybe rev. 28/29?). In rev. 26 and other old versions, text files (.DRW files) were used to drive the program's graphics interface. It was a bit crude, but it worked.

As for ATC/TTC calculations, I'm 99% certain they can be done with rev. 26. I simply don't remember how we used to do it, though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor