Pull Out Strength Wood Screws 6

[varistor]

Hi All,

I am trying to find any data on pull out strength for wood screws fastening a aluminum flat plate to 6 or 10mm plywood.

Anybody any ideas?

Dave

 

[40818]

I have somewhere a wood handbook, think it was available online, hold on heres the link:

http://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr113/fplgtr113.htm

(or google wood handbook)

go to chapter 7, and it will detail screws in wood and withdrawal forces

 

[MintJulep]

As with any handbook value, use with caution as you do not necessarily know the assumptions, conditions and limitations that are associated with the data.

Something like this is likely to be highly application dependent. If it's really important, your best bet is to conduct your own testing so you'll understand what was done.

 

[tomwalz]

APA - American Plywood Association

Maybe Forintek

Thomas J. Walz
Carbide Processors, Inc.

http://www.carbideprocessors.com

Good engineering starts with a Grainger Catalog.

 

[csd72]

http://www.awc.org/calculators/conn...1.0&submit2_LBD=Calculate+Connection+Capacity

 

[tomwalz]

Wow, now that's an answer.

Tom

Thomas J. Walz
Carbide Processors, Inc.

http://www.carbideprocessors.com

Good engineering starts with a Grainger Catalog.