Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pump design for water

Status
Not open for further replies.

peinnj123

Civil/Environmental
May 19, 2011
6
Any suggestions regarding industrial pump manufacturers for 3,412 cu.ft/day of water to be pumped 10' in height.

Is the pump design based on pumping once every hour?
 
Replies continue below

Recommended for you

18 gpm at 10 ft.
Little Giant make a variety of low cost shaded pole motor fountain/utility pumps that will meet that spec.

Hydrae
 
Goulds or Waterpumpsdirect have a ton of pumps that will move the amount of water you need> 18 gpm really isn't too much, you could probably pick up a pump at a local hardware store that can move that kind of water.


Bradley Dennis
Civil Engineering
 
My upflush toilet with its macerator will do that.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor