Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pump for Grease Waste - Possible??? 6

Status
Not open for further replies.

mmukai

Civil/Environmental
Feb 21, 2007
1
0
0
US
We have a situation where our grease interceptor is too high for gravity feed. Are there pumps that are capable of adding pressure head to pump grease waste to our interceptor?
 
Replies continue below

Recommended for you

There are pumps that can lift concrete up several stories. So, I would think, there are pumps that can lift grease water.

Try Gorman-Rupp, Goulds, Hydromatic. Probably others.

Engineering is the practice of the art of science - Steve
 
Depending on flow you might try an air operated diaphragm pump. These pumps are made for pumping slurries and can be used for grease. You can achieve a head equal to compressed air pressure.

One manufacturer is wilden
 
When choosing a pump for grease, you should go for submersible pump with open impeller. These are pumps for waste water and not any mass of grease could be trapped into the pump.
 
Status
Not open for further replies.
Back
Top