Pump station control 1

[Ouahmed]

I'm working on pump station which is already designed, But i'm want to just verify the design manually or using a software, have you any idea how shall i start?

 

[BigInch]

Doesn't sound like you're ready to do it. Why not hire a pump station engineer.

Technology is stealing American jobs. Stop H1-Bs for robots.

 

[LittleInch]

Verify which bit of the design exactly??

Very vague question so very vague response I'm afraid

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[Ouahmed]

Thx for yours replies ;
Hi BigInch
I want to learn how to do it

Hi LittleInch
i want to verify the diameter of pipes and the choice of pumps (cavitation and HMT ...).Infact, how can i know a station is correctly designed ?

 

[Gator]

how can i know a station is correctly designed

What?!

 

[LittleInch]

By employing competent designers / consultants and getting other consultants / experienced engineers to review / approve the design. Go and work for one of those and then you will learn how to do it.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[MFJewell]

Infact, how can i know a station is correctly designed ?

I'd start by making a system curve and comparing against pump curves for the selected pumps.

 

[Gator]

MFJ, I don't mean to sound unkind, but it seems like you might have to explain what those things are for the OP. Sorry for me being a bit cranky today.

 

[Ouahmed]

Thx everyone !

 

[BigInch]

Hope this helps. Lots of information here. If you read and study it, you'll learn how to do it.

http://www.mcnallyinstitute.com/The Tutorials/Tutorials_tn001.htm

Technology is stealing American jobs. Stop H1-Bs for robots.