Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Punching Shear Analysis for each building

Status
Not open for further replies.
samad1381

samad1381

Geotechnical
Apr 1, 2012
9
The punching shear analysis shall be performed for each and every structure within the limits of the area of concern. It shall take into account the actual measured strength properties of the proposed fill material.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

learning2geotech
  • Question
Ignore Circle in CU Triaxial Shear Test
Replies
1
Views
2K
EireChch
EireChch
S
  • Question
Undrained Shear Strength from Unconsolidated Undrained Triaxial Test
Replies
5
Views
4K
morecoffeeplz
morecoffeeplz
I
  • Question
Question about Direct Shear Test, CU and UU test
Replies
2
Views
2K
ripongeo
ripongeo
GeoExplorer
  • Locked
  • Question
Reversal direct shear test
Replies
0
Views
849
GeoExplorer
GeoExplorer
learning2geotech
  • Locked
  • Question
Particle Size Analysis for small SPT Soil Sample with Gravel
Replies
2
Views
395
MTNClimber
MTNClimber

Part and Inventory Search

Sponsor

Back
Top Bottom