Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Quad Rings

Status
Not open for further replies.

sreid

Electrical
Mar 5, 2004
2,127
What are the primary uses of Quad Rings [X-Rings?] vs. O-Rings?
 
Replies continue below

Recommended for you

We use them in higher pressure hydraulic components as they do not change shape as much and can be easier to install. Many spool valves use them instead of o-ring to seal the end of the spool.

We will be testing them as expanders under acetal seal ring for cartridge valve operating from 0 to 15,000 psi.

Ed Danzer
 
They are also used quite a bit in dynamic applications such as pistons.

Because of their shape they won't fail by being twisted, and also provide two points of sealing vs one provided by standard o-rings.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor