Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Cycle color wheel" only give 4 different colors. I want more!

Status
Not open for further replies.

Munnichs

Mechanical
Jan 21, 2003
23
NL
I have the option 'cyle color wheel during part creation' enabled. But it only gives 4 colors (orange, golden orange, red, and magenta, color # 9 until 12) instead of the 15 colors that are available in the color palette. Does anybody know how I can get more colors in the part creation proces than the 4 that I have now?

Any help is appreciated.

Regards,

Roy Munnichs.
 
Replies continue below

Recommended for you

I don't know the answer to that one. I know you can turn off your color wheel, in your Options-preferences Modeler/Assembly cycle color wheel.

I would like to know the answer to this one myself. . .Anyone?
 
When you go to Options -> colors, how many colors are listed there? On that same form, how many colors do
you see when you click the "Fixed Colors" button?
Does the "color cube" look right?
Can you create new colors?
Blue = [red=0,green=0,blue=100]
Cyan = [red=0,green=100,blue=100]

 
When I do both things you ask, I can see 15 colors. An I can create new colors, but the color wheel only gives 4...
 
I found out there is no fix for this yet,
there is a PIR issued to this
problem, PIR#4706792

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top