Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Special Seismic Load Combination using Overstrength Factor" for user made combinations

Status
Not open for further replies.
NewbieInSE

NewbieInSE

Structural
Dec 19, 2019
234
Hello Dear Engineers,
ETABS' Steel Frame Design Manual says,
2021-09-30_15_05_49-AISC-360-05_ETABS.pdf_-_Nitro_Pro_pxdaqc.png


Again,

2021-09-30_15_07_48-AISC-360-05_ETABS.pdf_-_Nitro_Pro2_pgsbvv.png


What I understand is ETABS produces auto-generated load combinations based on the user-defined load patterns and load cases depending on specific user-chosen design code and seismic preferences. I believe ETABS can work on the auto-generated seismic load combinations and apply on them the overstrength factor internally to perform the "special check for column".

What if the load combinations are user-made rather than being program-generated? Is ETABS going to apply the overstrength factor internally to perform the "special check for column"?
 
Status
Not open for further replies.

Similar threads

Angel Vila
  • Locked
  • Question
SEISMIC USER DEFINED LOAD
Replies
3
Views
3K
sticksandtriangles
sticksandtriangles
X4vier
  • Locked
  • Question
"do you want to reiterate analysis and design" Option not available on ETABS 22
Replies
4
Views
1K
Luceid
Luceid
GJoeRMK
  • Locked
  • Question
Does anyone know why etabs asign masses to "Base" (I assume is the nodes in the foundation
Replies
2
Views
578
GJoeRMK
GJoeRMK
compe_ad
  • Locked
  • Question
Warrning message - "No usable starting vectors are available; no ritz modes can be found"
Replies
3
Views
1K
li0ngalahad
li0ngalahad
eminsade
  • Locked
  • Question
ETABS API Python "Analysis Result"
Replies
0
Views
324
eminsade
eminsade

Part and Inventory Search

Sponsor

Back
Top Bottom