Dec 4, 2006 #1 MarkUMSU Mechanical Sep 7, 2006 51 I'm familiar with the helical sweep commands for making round springs, but does anyone have advice for making a rectangular spring?
I'm familiar with the helical sweep commands for making round springs, but does anyone have advice for making a rectangular spring?
Dec 4, 2006 1 #2 jeff4136 New member Dec 5, 2002 215 Assuming you mean a wrap on a rectang form, might take a look at http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=29666and see if there's something you can use. Upvote 0 Downvote
Assuming you mean a wrap on a rectang form, might take a look at http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=29666and see if there's something you can use.
Dec 4, 2006 1 #3 Heckler Mechanical Apr 2, 2004 1,932 Are you trying to make a smalley wave spring? Best Regards, Heckler Sr. Mechanical Engineer SW2005 SP 5.0 & Pro/E 2001 Dell Precision 370 P4 3.6 GHz, 1GB RAM XP Pro SP2.0 NVIDIA Quadro FX 1400 o _`\(,_ (_)/ (_) Never argue with an idiot. They'll bring you down to their level and beat you with experience every time. Upvote 0 Downvote
Are you trying to make a smalley wave spring? Best Regards, Heckler Sr. Mechanical Engineer SW2005 SP 5.0 & Pro/E 2001 Dell Precision 370 P4 3.6 GHz, 1GB RAM XP Pro SP2.0 NVIDIA Quadro FX 1400 o _`\(,_ (_)/ (_) Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.
Dec 5, 2006 Thread starter #4 MarkUMSU Mechanical Sep 7, 2006 51 This article is just what I'm looking for. Thanks Jeff! And Heckler, Though I wasn't making a wave spring, this is an interesting technology for a different project. Thanks for bringing it to my attention! Upvote 0 Downvote
This article is just what I'm looking for. Thanks Jeff! And Heckler, Though I wasn't making a wave spring, this is an interesting technology for a different project. Thanks for bringing it to my attention!
