Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reduced volume in Lee Kesler EOS

Status
Not open for further replies.

Whelp

Chemical
Feb 10, 2011
4
0
0
IS
I’ve been trying to implement the Lee-Kesler EOS in a spreadsheet but my results are inconsistent with tabulated values. The correlations are given in terms of the reduced volume Vr which I calculate as Vr=Tr/Pr. Is that correct?
 
Replies continue below

Recommended for you

My reasoning in not including the gas constant R was that if PV = RT and PcVc = RTc then by dividing the two equations one gets PrVr=Tr. But apparently, Vr is not defined the same way as Tr and Pr are.

 
Status
Not open for further replies.
Back
Top