Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reference / Text Book 2

Status
Not open for further replies.

justhumm

Structural
May 2, 2003
112
I've never really used P3 before and I'm looking for a good book to use as a reference and tutorial.

Suggestions?
 
Replies continue below

Recommended for you

I suggest that you book yourself onto the Primavera 601 course.

Regards
 
Paul E. Harris has published several good books. Take a look at his website:


HTH!

Bernard Ertl
www.interplansystems.com
- eTaskMaker Project Planning Software
- ATC Professional Turnaround Management Software
 
I tried with the Primavera manual and found it impossible so I surfed to look for books.

I now have Paul E. Harris books for Primavera 3.0 , Suretrak 3.0 and MS Project 2002 and.. just excelent!

Available at but founf them cheaper at (EH is based in Melbourne, Australia)

Javier
 
paul E harris are absolutely excellent!
i have his book for P3 3.1, suretrack 3 and project 2002 and are a must!
they can be considered as expensive considering it´s an A4 fairly printed book but it is useful for beginners and users (it´s cheaper at amazon.co.uk than at harris´site eh.com.au)
it has useful examples at the end of each chapter which allow you to gradually gain control of MS project capabilities

regards,
javier
 
Can anyone tell me how to change the P3 data tables, data types, for example OrigDur? My problem is that a calcuation that has been set up to subtract a field from OrigDur does not seem to pick up 3 numerics, only 2. Thank you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor