Refrigerator design software

[gaber26111]

Hello everybody,

I am working on a refrigerator design, for achieving a certain amount of cooling capacity, and to reject the heat into room temperature of 25 celesius degrees, the design formulas i do have, for heat-exchangers selection, pipe line , Compressor, and expansion valve, etc " Refrigerator components ".

I see it hard to solve those formulas, and get optimum results, to create a Bill of Materials of the Refrigerator components according to that, or in other words, I prefer to have a software which is used for that kind of design.

So does anybody have tried any of reliable software which i can use for that refrigerator design and right selection for its components?

Will appreciate your help,
Thanks

 

[Drazen]

for industrial refrigeration the best i know is to use manufacturer's software - visit bitzer, danfoss etc.

you need to learn, though, system design by yourself - schematics, which compoment to oversize etc.

 

[gaber26111]

Ok Thanks Drazen for your reply, i think that what i will do , to make manual design, and each component sizing, it's not for industrial use by the way, just home appliance refrigerator to be in room temperature

i will get back, if i had to ask about anything while i am working on the components

Thanks again