Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reg.Hydro statci pressure test of hsd tanks

Status
Not open for further replies.
Oct 31, 2014
2
Dear All,

I will like a clarification on the issue below.

how do hydro static pressure test methods of 490KL(7X70KL) storage diesel tank?

Dia - 3 m /length-10.5 m
 
Replies continue below

Recommended for you

Fill 85-90% full of water. Add compressed air or nitrogen to bring the pressure to about 0.8 kPa VERY CAREFULLY, preferably using a water manometer for a pressure gauge. Visually inspect 'wet' portions for leaks; apply water & soap solution to test for leaks in the 'dry' portion. Simple.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor