Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remote Access to PDM/Works?
- Thread starter rokahn
- Start date
CorBlimeyLimey
Mechanical
Yes, but if the vault is behind a firewall you will have to set up a de-militarized zone (DMZ). All that does is tell the firewall/router that the particular IP address of a protected computer is allowed to bypass its protection. However, I believe you have to purchase a dedicated domain or subscribe to a solution provider like DNS2Go.
Check out
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
from (the City of) Barrie, Ontario.
![[lol]](/data/assets/smilies/lol.gif "[lol] [lol]")
Everyone has a photographic memory. Some just don't have film.
Check out
from (the City of) Barrie, Ontario. Everyone has a photographic memory. Some just don't have film. - Thread starter
- #3
CorBlimeyLimey
Mechanical
rokahn
Why not try the 30 day free trial, then you will know first hand exactly what it is like.
from (the City of) Barrie, Ontario. Everyone has a photographic memory. Some just don't have film. - Status
Similar threads
- Locked
- Question
- Locked
- Question