Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove Elements from a model

Status
Not open for further replies.

engguy5

Civil/Environmental
Joined
May 12, 2009
Messages
1
Location
US
Hi,
I am simply modeling a 2d rectangular solid with a very fine mesh. Within the rectangle there exists some gaps which at those locations I do not want to define any elements. I am using a parametrized input file so when I build the model, the easiest way is to use *ELGEN to define elements across the whole rectangle, but I don't want elements at the gap locations so is there a way to remove certain elements defined by *ELGEN?

Also, at times I am interested in removing elements from a elset. Is this possible?

Thanks!
 
Yes, you can remove elements if you work with an orphan mesh part and use the mesh editing tool. You have to use the display group and somehow select the elements that you want to delete i.e. if you can get a display of only those elements that you want to delete, then you can select all those elements and delete them.'

Gurmeet

Gurmeet
Time is an illusion. Now is the only thing there is.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top