Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Requesting for the ASME Design & welding standard for Slag Silo

Thread starter sebinsaif
Start date Nov 22, 2016

Status: Not open for further replies.

Nov 22, 2016

sebinsaif

Mechanical

Dear,
I want to make a Slag Silo with a Diameter of 4500mm & 8500mm height & shell thickness is 10mm with conical bottom.
Anyone knows about the ASME Design & welding standard for Slag Silo or Australian Standard. Please reply me
Thanks,
Sebin

Eng./ Sebinsaif
Dammam, Saudi Arabia