Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Research and locating hard to find information 6

Status
Not open for further replies.
RRiver

RRiver

Automotive
May 21, 2018
119
*reposted from automotive engineering

How do you working engineers deal with this? Since the standard search engine became about nothing but selling something to users they've become useless. The search engines that aren't about sales are mostly too specific. Accessing university research papers can be helpful but limiting. The paid for commercial services aren't much better with "specific," or "specialized." I expect I will have to pay for the search engine when I find one but I'm having a hard tine finding one. If the question applies, what do you use?

Years ago I visited a working railroad museum in Pennsylvania where they restored old locomotives and without available information they hired engineering firms to do the necessary materials and design work. What would a they use?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Please refrain from double posting

Your question is overly broad; I've not had that much of an issue with finding information; assuming it was digitized at all. For the most part, if the information exists at all, it's likely at least mentioned on the internet. You have access to literally millions of articles, or their abstracts, on Google Scholar, Microsoft Academic, or any of the journals in print.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
I find that Google works just fine for most things. Granted, you may have to sort through the paid-adverts and such, but if I formulate my 'search string' carefully, I can usually find what I'm looking for in a minimum of cycles.

John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Upvote 0 Downvote
Irstuff, My apologies for the double post. I first posted under automotive, as you already know, before I knew this forum topic existed. After finding it I thought the question might reach more members dealing with similar issues. It won't happen again though.

Believe me, I have been aggressive in trying to find information that 10 years ago was much easier to find. I have tried a long list of different search engines. The information I'm looking for is obscure. Not a lot of people are even familiar with the information but that doesn't really matter anymore. This past weekend I was trying to find dimensional and materials information on a known racing differential from the 50's and could find nothing on 4 different search engines. I did get pages and pages of places where I can buy differentials at that bear no relationship to the query I made. Information that should have been much easier to find than information on the few highly modified Russian Skoda's that were raced in the US in the early 30's. I also know there is information available because I've come across some of it in the past. You're fortunate if you don't have problems finding the information you're after. Remember, nothing on the internet is ever truly lost or so is often said but try finding an article from a little know racing journal that someone put up on the internet 20 years ago. Good luck.
 
Upvote 0 Downvote
John, thank you. I agree and at one time wording made a difference. Not anymore for example:

1. Russian Skoda's raced in the US 1930's
2. Russian Skoda's raced in the United States 1930's
3. Russian Skoda's raced in the United States
4. Skoda's raced in the United States
. . . . . . .
#. Skoda race US

Any suggestions? In this I didn't even revisit the racing journals article.
 
Upvote 0 Downvote
duckduckgo.com will give you a different set of results, though it may not be the set you are looking for. However, it sounds like what you really need to do is more research. What is the name of the journal you are looking for? What website was it posted on? What do you need to know about the Skodas? Who owned them? What races did they participate in, etc.? Find better search terms and you will get closer to finding your article. Then there is also the idea of posting on a racing forum dedicated to these cars, or something similar. Much of the obscure information of the world is held in our heads, rather than on the internet. All you have to do is ask the right person.
 
Upvote 0 Downvote
cdill21,

You are absolutely right on with the information being in peoples heads. Unfortunately most of those people are passed on and what's left is what they documented before passing. I have been down all the routes you mention. The problem is finding where the information is indexed.

I'm not going down rabbit holes about my difficulties finding the information. I've talked to people working on the other side of our internet providers and there is plenty of information on how the changes to the laws regarding personal data and information changed the internet and the laws a changing more and more against the internet customer. The most recent changes had almost completely removed your right to say you don't want sites to collect personal data on you. Internet providers will tell you that they are tailoring you experience on the internet to your use habits. I spend most of my time researching automotive information. Easy enough with what's mainstream but the obscure has disappeared. About 6 years ago I was doing research on engine reversion and massive amounts of information was available. Pages and pages of PDF format papers. Search engine reversion now and see what you get. A lot will come up that might be suitable for garage mechanics but the PDF's are gone along with the professional journal publications. Maybe once you get to page 40 of a search something might show up but at one time it all started on page one. Unfortunately there is no option to remove all retails sales sites or sites funded by retails sales sites or organizations representing retail sales.

This is all no accident and it's no secret. There is some information available on how most of what was available has been squeezed out for marketing and sales. But even marketing and sales is limited. I recently did look for some H-Beam forged pistons for a Ford engine. The second site on the search result was a place that dealt with nothing but products for GM's. The search started with Ford but all the search saw was pistons. How do you properly word a search for Ford? I just did a search for "New Ford Cars," and the 5th result was an inventory of used Fords at a used car dealership.

What I would like and would gladly pay for is a search engine that is devoid of sales and marketing. Does that exist?

I'm just reminded that just this morning I had an error on my computer. It was a "blue screen" error code although I didn't have a blue screen. Using programs like task manager and program services I found out I had a driver error for Amazon.com's data logger and tracking service. I had no idea and I use amazon maybe once a year and that's being generous.

Taking my search engine question farther, I have doubts that we actually own our own computers anymore considering how little control we have over their operation. But that's something else to this.
 
Upvote 0 Downvote
IRstuff,

I understand the need to limit over posting the same things but I also wonder if there aren't legitimate reasons for it? My question obviously has to do with the automotive forum so I posted there. Finding this forum I posted here to expand my question beyond automotive where the same difficulties may exist. I went through the first and about half of the second page here and other than myself there was only one other participant identified by automotive. Where else can a post go to reach more users without double posting?
 
Upvote 0 Downvote
In most cases, there are some non-overlapping forum subscriptions, and since everyone here is ostensibly a working stiff, it would terribly wasteful to spend a significant amount of time writing a tome in response to your question, only to find out that someone else, in a different forum, already answered with the same answer.

It's a matter of politeness and consideration for others. One option is to use only one thread for answers and have your other post point to the one thread to minimize duplication of answers and wasting peoples' time.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
IRstuff,

I completely understand and did before you posted. My question was directed more to the thought of, where does a generic engineering question fit? Maybe more rhetoric than requesting a specific answer.
 
Upvote 0 Downvote
perhaps you need to try Advanced search operators. these can be used to greatly reduce the number of hits and target more on what you are looking for. see below for some examples. unfortunately, these are not well publicized, but you can google search to find them...



 
Upvote 0 Downvote
CVG,

Thank you for this. Some of this is new and some is a blast from the past. The operators ", -, +, < and > I used at one time all the time but again, their effectiveness seemed to have fallen off but I've also been given reason why that might be that has nothing to do with the search engine.

Since I was last on the computer I happened to run in to an computer\internet guru neighbor and got to talking to him about all of this. He told me there's a good chance I've been hit with a browser hijacker. He told me most aren't malicious in terms of some kind of identity theft and what they do is maximize the goals of a marketing or advertising service that has hired them. He told me a lot of what is behind this and how it's happening is mostly related to phone apps that crossover to a users windows and internet explorer use. I got some tips on how to look into this. He also told me it's becoming more and more common for internet service providers, including some of the big names, to break in to browsers and take over some of the search engine bandwidth. Without a good understanding of the coding used by Microsoft and internet explorer it's really hard to find out if this is going on.

I'm thinking about reinstalling some things he suggested tomorrow and see what happens. I will lose any settings I have that are involved with what affected with this solution though. I may even just reinstall everything to see if that solves any of what I'm dealing with. Even he said what I'm describing is in his opinion "over the top" to what I should be seeing going on. When I told him about my earlier search for "new Ford cars," he said I should have seen little about buying a new car and nothing about what Fords a used car dealership has on the first page.

Thanks again CVG and everyone else.
 
Upvote 0 Downvote
Frankly, I find that in performing technical searches, the internet worked better 15 years ago than today. Search engines assume your are on the internet for shopping and push results that are the most typical things shoppers buy. As RRiver indicated, the operators ", -, +, < and > are mostly ignored anymore.

And searches on news websites! I've typed in the actual article title, author, and news source name, but if it is not the news-spin topic the site wants you to see, then the actual article will appear probably 30 hits down the page - if its in the search results at all.

I'm beginning to think AI stands for Automated Idiot.
 
Upvote 0 Downvote
15 yrs ago there was, perhaps, 0.02% of the current stuff online, and you had to go to the company library to find a lot of stuff. It's like asking the internet for the secrets to CPM80 bios design. If it wasn't on a journal website, or Wikipedia, or internet archive, it might truly be gone. The internet is currently encroaching on 0.2 yottabytes of data. And while some stuff lives on, other stuff does get lost, particularly all that stuff in various self-published sites hosted by now-defunct ISPs.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
IRstuff,

I think you're right and 10% of what's been added is probably cat videos! lol

I did reload and restart some things this morning and it did make a difference in my searching. A noticeable difference. I really had no idea that might or could happen. But, I did also start up an old computer today also and dug up some old saved web addresses from the old Window days which was good for a laugh but some of those sites did come up with an address but not in searches.

I'll persevere and get through this. Thanks again for the help.
 
Upvote 0 Downvote
Bear in mind that search engines are essentially automated popularity contests in a microcosm; any search result that doesn't garner interest winds up moving downwards in the result listing. If your subject matter cannot be cleanly segmented from something that is more popular, you might do well to start with the 10th or 100th page of the results.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
LOL. Yep, a search strategy I'm familiar with.
 
Upvote 0 Downvote
When I search on google for my own website, using a certain combination of keywords (say four), I am able to find my website ranked in the 1st page of google search.
If I do substitute one word with a synonymous or a word which has relatively close meaning (example: substitute evaluation by analysis), my website appears in 3rd or even 4th page of google search. So it is not only a Google / search engine thing, it is also how the website are inherently designed so their rank position in search engine stays optimal vs. numerous and various combinations / substitutes of key words.

If you plan an escape, you must succeed as if you fail, you will be punished for trying. Never say or write down your plan. Heart is the only place where secrecy is granted.
 
Upvote 0 Downvote
Agreed that its probably not a search issue as much as an availability issue. We had a big loss recently when the glassfiles website went down. It had thousands of papers in my area which are really not anywhere else.

For this reason and others, I think its important to have your own library of things which might go dark one day.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Science_Geek
  • Locked
  • Question
Looking for guidance to find contractors to create prototype for my invention 2
Replies
15
Views
180
JStephen
JStephen
BR0
  • Locked
  • Question
Proposals and Exclusions 2
Replies
6
Views
253
BR0
BR0
KevinNZ
  • Locked
  • Question
Drawing signing and control 1
Replies
8
Views
186
CWB1
CWB1
EngrPaper
  • Question
When to hang up my shingle 2
2
Replies
23
Views
521
AgMechEngr
AgMechEngr
CapExCEO
  • Locked
  • Question
Where to find a good industrial machinery advertising company or animation company?
Replies
3
Views
100
geesaman.d
geesaman.d

Part and Inventory Search

Sponsor

Back
Top Bottom