midhun78
Computer
- Mar 16, 2003
- 13
hi ,
After using the IDEAS report writer for sumarising my Reaction force data on a surface , I am getting in X direction the Total Reaction force equal to 1.2E+05 N , in Y direction 7.2E+05N and in Z direction 1.2 E+02 N .
But my total resulant Reaction Force magnitude for the Surface comes to around 3.65 E+06N . This Value is not logical in view of the X , Y and Z components .
What could be the reason for this illogical total resulant Reaction Force ? . What Procedure is used by the IDEAS report writer for calculating total resulant Reaction Force magnitude for a surface ??
Any suggestions will be most welcome
Midhun
After using the IDEAS report writer for sumarising my Reaction force data on a surface , I am getting in X direction the Total Reaction force equal to 1.2E+05 N , in Y direction 7.2E+05N and in Z direction 1.2 E+02 N .
But my total resulant Reaction Force magnitude for the Surface comes to around 3.65 E+06N . This Value is not logical in view of the X , Y and Z components .
What could be the reason for this illogical total resulant Reaction Force ? . What Procedure is used by the IDEAS report writer for calculating total resulant Reaction Force magnitude for a surface ??
Any suggestions will be most welcome
Midhun