RIP

[TateJ]

Why can't I get a RIP to work on this corner the way the HELP menu says it will?

Windows XP / Wireless Intellimouse Explorer
SolidWorks 2007 SP1.0 / SpaceBall 5000
Lava Lamp
www.Tate3d.com​

 

[ctopher]

faq559-1100

Chris
SolidWorks 06 5.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 10-27-06)

 

[TateJ]

...oops was that too wide?

now back to the question...

Windows XP / Wireless Intellimouse Explorer
SolidWorks 2007 SP1.0 / SpaceBall 5000
Lava Lamp
www.Tate3d.com​

 

[CorBlimeyLimey]

Does the image on the left show an assy or part?
If it's a part, then it's the lip that's preventing the "Rip".
Sheet Metal parts must have a common thickness.

What is the RH image supposed to be showing?

 

[TateJ]

It's a PART that has been SHELLED... aka uniform thickness. Left is the whole part... Right is just one corner. I couldn't get a RIP to work on even just the inside "step".

Windows XP / Wireless Intellimouse Explorer
SolidWorks 2007 SP1.0 / SpaceBall 5000
Lava Lamp
www.Tate3d.com​

 

[TateJ]

OK... I got it to work with 2 seperate sketches.

Windows XP / Wireless Intellimouse Explorer
SolidWorks 2007 SP1.0 / SpaceBall 5000
Lava Lamp
www.Tate3d.com​

 

[ctopher]

Thanks for resizing the pics. It does havoc on my screen when too large.
That's great you got the part to work.

Chris
SolidWorks 06 5.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 10-27-06)