Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Risa-Revit link

Status
Not open for further replies.

baw1

Structural
Dec 21, 2006
38
Just a question to ask if anyone has had good success with the round tripping of the Revit Risa Link, and are there any good tricks to make it work better.
I have used the link about a dozen times, but every time there is a lot to clean up, and I have always been frightened of the round tripping. It just has not worked for me. I usually just go once one way or the other and not the full circle.
Is there any good, up to date tutorials on the link?
 
Replies continue below

Recommended for you

Hi Baw1,

Currently we have our documentation about the link which does describe each links features as well as tips on how to round trip. You can get this at
If you're seeing a lot of things to clean up when you translate the data, we'd appreciate knowing exactly what you're seeing. We've tried to make sure 95% of the data goes back and forth with little to no clean up neccesary

Let us know if we can address any specific issues you might be having.

RogerAtRISA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor