Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

rock identification 1

Status
Not open for further replies.

alchemistjr

Chemical
Sep 10, 2013
3
Hi all!

I have a rock sample that needed be to identify.

The rock is large in size, approximately 200-400kg with pores and fossil which can be seen by naked eyes.

Attached along are an overview of the rock and the microscopic view of the rock and the fossil observed.

I need to know what type of rock is this and whether can it be found in France?

Thank you.

getfile.aspx
 
Replies continue below

Recommended for you

Probably some type of limestone or other carbonate rock.
Try dropping dilute Hydrochloric acid on it to see if it "fizzes" to confirm carbonate content. I'm sure it could be found in France.
 
agree with moe.....further, it looks more like the texture of a sandstone, but is obviously calcareous...likely from a shallow formation.
 
the crystals in the vugs seem to show some secondary mineralization - likely from mineralizing fluids coursing their way through discontinuities. The dusty surface seems to suggest a carbonate rock, i.e., limestone or dolostone. The acid-test will help. Not sure about the presence of sand. Maybe it's there? Usually though limestone is deposited in an quiet water environment and sandstone is deposited in a shoreline environment.

It's hard to see if the crystals in the vugs are calcite or quartz. I mean I could tell with the naked eye.

So, with what I know, I'd just call it a limestone. If you knew the source of the rock, you could check geologic publications and learn the formation name. That may help too?

When in doubt, call it, "Leaverite." Leave 'er right there!

f-d

¡papá gordo ain’t no madre flaca!
 
There is a web site forum called "GeologyRocks". It would appear to me you can get your question answered there.
 
Don't you sort of have to reverse your question?

"We found this rock in so-and-so province in France. Can it be found elsewhere in France? " *<)
 
Dear all,

Thanks for your opinion.

I have tested it with diluted HCl and also done a SG test. Meanwhile, I have also sent a piece of the rock to a local geology lab for analyse. It is said that the rock sample is a compact limestone (fossiliferous) with various type of fossils seen include gastropods, bivalve and radiolaria/foraminifera. Consider as an organogenetic sedimentary rock.

Another geologist agrees that the rock is a type of fossiliferous limestone but the physical appearance is not a common in Malaysia but have seen a similar rock in UK that also extent to France and other Europe countries. May I know does anyone can recommend a geology laboratory in France?
 
Anteagroup (see their website, activity : "infrastructures", then select "carrières" (quarries) or "Géotechnique".
 
I don't know if this rock can be found in France but I have about a dozen rocks of that type and size on my front lawn in northeast Pennsylvania. You're welcome to take them.
 
Thank you so much BigHarvey..[smile]

You are funny, bridgebuster..[tongue]
 
[auto]Thanks alchemistjr, but the offer still stands. There's about one ton; just bring your truck.
 
I'm curious. Why are you posting a geology-related question that seemingly has nothing to do with engineering on a geotechnical-engineering thread? And why do you want to know if the rock could be from France? If you're doing engineering work based on information you get from this sample, you of course must know where it came from.

If this relates to a problem that has to do with engineering, with a bit more information, we can probably help you out. If you need geology information, this is not the best place to post your question.
 
AW, ebernozen. Geology, geotechics, it all in the ground. He got help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor