Roller bearing standard for angle of misalignment

[UCengno1]

Is there a standard for free angle of misalignment for a standard roller bearing, 12-15mm ID.

 

[Tmoose]

regular cylndrical roller ?
page "585" here -

http://www.skf.com/binary/86-121114/Cylindrical-roller-bearings.pdf

Skf's CARB bearings have a curious profile that permits a lot more.

Better to provide a statically self-aligning feature if there is not a common housing.

 

[BearingDave]

There are various types of roller bearings.

Cylindrical roller bearings only accept a couple minutes of arc of misalignment before having their performance affected.
Spherical roller bearings can accommodate between 1.5 and 2.5° degrees of misalignment, depending on their series.

You need to better define what type of roller bearing we are talking about here. "Standard" is not enough information.

 

[Tmoose]

UC's last log in was the day of the OP last year. oh well