Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rotation option in FactoryTalk ME

Status
Not open for further replies.

abidmunawar

Industrial
Apr 19, 2018
4
I have to show 2 axis robot movement on PV+ 1500 with FactoryTalk ME 9.

We have 2 motors for a ladle application at a casting plant. Each motor feedback is thru absolute encoders.

Feedback can be in FLOAT, but if its too much, we can try with INT with range of 0 to 360 degree.

Any suggestions?
Trying the Rotation option in Global Object at the moment.
 
Replies continue below

Recommended for you

Are you trying to visualize motion in 2 different planes? If so, I do not believe you will be able to accomplish anything that looks like the actual movement, as the angular perspective will not be correct. The input can be any engineering unit, and you define the center of rotation, the position at each end, and corresponding register minimum and maximum values. The rotation is depicted in linear format. Floating point is okay. Sometimes, I do a course depiction of movement using a series of images with visualization animation to increment them. That may not be practical for you but it's another option.

Brad Waybright

It's all okay as long as it's okay.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor