Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Safety Relief Valve Venting
- Thread starter wlc1
- Start date
jsummerfield
Electrical
See if API 520 Part II helps. The title is Sizing, Selection, and Installation of Pressure-Relieving Devices in
Refineries
Part II—Installation
I think that the current edition is API RECOMMENDED PRACTICE 520 FIFTH EDITION, AUGUST 2003.
John
Refineries
Part II—Installation
I think that the current edition is API RECOMMENDED PRACTICE 520 FIFTH EDITION, AUGUST 2003.
John
WLC1,
You may also want to look at API RP-521, GUIDE FOR PRESSURE-RELIEVING AND DEPRESSURING SYSTEM. Refer to their sections 4 and 5 covering disposal systems (atmospheric, flare, etc.)
Another good all-around reference for relief systems is "Guidelines for Pressure Relief and Effluent Handling Systems" which is an AICHE, CCPS publication.
You may also want to look at API RP-521, GUIDE FOR PRESSURE-RELIEVING AND DEPRESSURING SYSTEM. Refer to their sections 4 and 5 covering disposal systems (atmospheric, flare, etc.)
Another good all-around reference for relief systems is "Guidelines for Pressure Relief and Effluent Handling Systems" which is an AICHE, CCPS publication.
- Status
