Chris 10
Industrial
- Aug 9, 2017
- 5
Dear All
I know the various tests of the safety valve (by lifting the lever manually or by increasing the pressure until the popping point).
Is there an requirement to have the safety valve disassembled (e.g. every 4 years) to identify signs of corrosion, or other dirt build ups?
Many, many thanks for your support. Very appreciated
Chris
I know the various tests of the safety valve (by lifting the lever manually or by increasing the pressure until the popping point).
Is there an requirement to have the safety valve disassembled (e.g. every 4 years) to identify signs of corrosion, or other dirt build ups?
Many, many thanks for your support. Very appreciated
Chris
