Sanitary Lift Station for a Subdivision 2

[xghalibx]

Folks:

Could you please point me to a site that talks about designing a sanitary lift station for a residential developement. I have never designed a lift station and needs some guidance ASAP... thanks..

 

[semo]

What portion of the design are you needing help with? Inflow calculations, wetwell sizing, pump hydraulics, lift station layout?

What kind of station? Submersible, Self-Priming, Wetwell/drywell?

What will your inflows be or what will your population equivalent be?

What are your wetwell influent line elevations and your discharge elevations and any high point elevations along the forcemain route? What is the distance from your lift station to the point of discharge?

Lots of things to know before you can start a design.

I haven't seen much on-line; but, several pump manufacturers have design guides to help. Give more info and we can try to help or best to contact a local firm that does this kind of work. Not good to put $100K+ into the ground only to find it doesn't work.

 

[KRSServices]

Your best bet and certainly to minimize your exposure to future legal problems would be to hire an experienced engineer to look after the design. It wil not only save you money, but will also give you peace of mind that the station will be best suited to your needs.

KRS Services

http://www.krs-services.com

 

[piffer]

call romtec in oregon.

 

[publicWorks]

There is a web site called RedVector.com that will sell an online course on how to design and specify lift stations. I haven't actually used it, but have heard it is good for the basics. If it is a simple lift station, it might be worth the $250 charge for it.

 

[LHA]

First get your state's code, which will define all parameters. In PA, it is Title 25, Chapters 71 and 72.

Then you will need that state's design standards. In PA, it is "Domestic Wastewater Facilities Manual (DEP 1357)". It is free in .pdf, search under:

http://www.dep.state.pa.us

The PA ones are general enough to get started, but use your state's.

Now for site4 specific equipment/materials/construction: If it will ultimately become publicly owned, the Municipal Authority will want certain things...in many cases, they will pretty much hand you standard specs, tell you which pumps, auto-dialers and generators they want and might give you a set of plans to go by.

 

[skier59]

I recommend "Pumping Station Design," edited by R.L. Sanks.