Mar 8, 2021 #1 mustangmotors91 Structural Mar 8, 2021 1 Who can tell me which property modifiers to include when modelling a slab or a wall using SAP2000? Thanks in advance.
Who can tell me which property modifiers to include when modelling a slab or a wall using SAP2000? Thanks in advance.
Mar 9, 2021 #2 MSUK90 Structural Jan 29, 2020 155 M11,M22,M12,F11,F22,F12- 0.25(For Slabs) F11,F22,M11,M22,M12- 0.35(cracked)/0.7(uncracked)(For Walls) If wall is not designed for out of plane bending, use 0.1 as modifier for M11,M22,M12 beside the modifiers for F11 and F22 as given above. Upvote 0 Downvote
M11,M22,M12,F11,F22,F12- 0.25(For Slabs) F11,F22,M11,M22,M12- 0.35(cracked)/0.7(uncracked)(For Walls) If wall is not designed for out of plane bending, use 0.1 as modifier for M11,M22,M12 beside the modifiers for F11 and F22 as given above.
Mar 9, 2021 #3 engineering_patrol Structural Aug 9, 2020 62 If wall is not designed for out of plane bending, use 0.1 as modifier for M11,M22,M12 beside the modifiers for F11 and F22 as given above. I think 0.001 is better, do you agree? Upvote 0 Downvote
If wall is not designed for out of plane bending, use 0.1 as modifier for M11,M22,M12 beside the modifiers for F11 and F22 as given above. I think 0.001 is better, do you agree?
Mar 10, 2021 #4 MSUK90 Structural Jan 29, 2020 155 engineering_patrol said: I think 0.001 is better, do you agree? Click to expand... Yes, can use that too. Idea is to reduce the stiffness to minimal. Upvote 0 Downvote
engineering_patrol said: I think 0.001 is better, do you agree? Click to expand... Yes, can use that too. Idea is to reduce the stiffness to minimal.
